What to Do If
Models without keyless access system
The ignition switch does not turn from 0 to I. Why?
 
Models with keyless access system
The power mode does not change from VEHICLE OFF (LOCK) to ACCESSORY. Why?
  • The steering wheel may be locked.
Models without keyless access system
  • Try to turn the steering wheel left and right while turning the ignition key.
Models with keyless access system
  • Move the steering wheel left and right while pressing the ENGINE START/STOP button.
Why does the brake pedal pulsate slightly when applying the brakes?
This can occur when the ABS activates and does not indicate a problem. Apply firm, steady pressure on the brake pedal. Never pump the brake pedal.
The rear door cannot be opened from inside the vehicle. Why?
Check if the childproof lock is in the lock position. If so, open the rear door with the outside door handle.
To cancel this function, slide the lever up to the unlock position.
Why do the doors lock after I unlocked the doors?
If you do not open the doors within 30 seconds, the doors are relocked automatically for security.
Why does the beeper sound when I open the driver's door?
The beeper sounds when:
  • The exterior lights are left on.
Models without keyless access system
  • The key is left in the ignition switch.
Models with keyless access system
  • The power mode is in ACCESSORY.
Why does the beeper sound when I start driving?
The beeper sounds when:
  • Driver is not wearing their seat belts.
  • The parking brake lever is not fully released.
Why do I hear a screeching sound when I apply the brake pedal?
The brake pads may need to be replaced. Have your vehicle inspected by a dealer.